Life Is Beautiful

Super Mini RF Wireless Optical Mouse
User Manual

Welcome
Thank you for selecting this product! Your RF wireless optical mouse uses a newly developed wireless technology that replaces the traditional wired mouse. You can use your wireless optical mouse freely and improve your efficiency and enjoy your beautiful life from the high technology.


Product Features
1. Radio frequency 27MHz, enjoy your freely wireless spacs
2. It has 256 ID code, there is no interference even many mice being used at the same time.
3. Automatically save power sleeping functions, battery life be prolonged.

The Steps of Install Battery
1. Please prepare for two PCS new AAA alkaline batteries.
2. Press the button of the mouse upper cover and pull the battery cover rearward.
3. Please insert the batteries.
4. Pull the battery covers forward, when you heaf "crack" sound which shows the battery cover is locked successfully.

Receiver Installation
1. If you use PS/2 connector, please use the USB to PS/2 adaptor and connect with the connector before your computer start-up.
2. If you use desk PC, there is a little far between the case and your working surface, suggest you use an extended USB cable to connect your case and the receiver, so you can place the receiver on your working surface conveniently.

ID Setup
1. Please move the mouse near to the receiver
2. Press the ID button of the receiver by your hand, the receiver light begin to flash
3. Press the ID button of the mouse bottom with some hard and acuate object within 10 seconds, the receiver light will flash successfully to finish the digital transmission between the mouse and the receiver. You may start to use it.
4. Working distance:within 1-2 meters.

Attention Please
1. Please don't make the mouse far away from the receiver in order to work more smoothly.
2. You'd better use the mouse on the white desk, in this way the batteries can be used longer time. Please remove thebatteries if the mouse will not be used for a long time.
3. This mouse with save power sleeping functions, Please press any key or scroll the wheel to wake up the mouse when it is sleeping.
4. If you want to take off the mouse power, please continue to press the ID switch of the mouse bottom over 3 secons.If you want to take on the power,please click the ID switch once again.
5. The optical mouse will not work freely on a smooth desk, glass, any reflecting surface,3D mouse pad.
6. No need to check the digital connection within 10 seconds when change the batteries, if more that thatplease according to the above way to re-operate.

Caution
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.